Professional Dante Network and DSP 1000W Class-D Mixer Amplifier

• Type: Professional Amplifier
• Used For: Professional
• Function: Amplifier Combined
• Output Number: 2
• Voltage: 100-240V AC, 50/60 Hz
• Output: 100V or 4-16ohm, DSP Software Selectable
• Model NO.: MA-1000TD
• Frequency Response: 20-20,000 Hz, +/- 0.5dB at 1W, 8ohm
• Thd: Less Than 0.1% at 1W to Full Load
• S/N Ratio: 6dbu and 0dbu at 94dB
• Cooling: Internal 12VDC Fan, Extensive Heat Sinking
• Display: 240*240 Res, IPS Colored
• Dante Interface: 2 Channel
• Dimensions: 44.5(H) X 483(W) X 330(D) mm
• Transport Package: Gift Box/Export Carton/Pallet
• Specification: 1 U rack 19 inch
• Trademark: LUCKY-TONE
• Origin: China
• HS Code: 85184000

Product Description

Professional Dante network and DSP 1000W class-d mixer amplifier

MA-1000TD is a multi-function network DSP digital High-Z and low-Z power amplifier 2*500W@4Ω, 2*300W@8Ω, bridged 1000W@8Ω, low-Z 100V-1000W@10Ω. It can remotely monitor the status of power amplifier, set compression Controller, limiter, noise gate, parametric equalization, matrix routing, delay and other DSP functions in real time. Simple software interface provides customers with simple setup and operation experience, and a variety of connection methods ensure its good configurability and expandability, suitable for various applications, such as performance center, theatre, gallery, hotel, conference center, shopping center, retail store, restaurant, etc.

Features:
Δ Flexible Dante Network amplifier with DSP with both 100V line and 8ohm
Δ Software selectable
Δ Local analog audio input selection
Δ Built-in DSP digital processor
Δ Network TCP/IP control for multiple device management
Δ Support multiple on line modes: USB, TCP/IP, RS232, RS485
Δ Real-time remote monitoring of power amplifier working status
Δ Support balanced XLR input and unbalanced RCA input
Δ Support stereo, bridge, mono, free matrix mode, one-button switching


Ordering code:
MA-1000T: 2X500W mixer amplifier with DSP
MA-1000TD: 2X500W mixer amplifier with DSP and Dante
MA-2000T: 4X500W mixer amplifier with DSP
MA-2000TD: 4X500W mixer amplifier with DSP and Dante



  MODEL             MA-1000T/MA-1000TD                               MA-2000T/MA-2000TD

Output Power	2*500w at 4ohm; or 1*1000W at 8ohm bridged, 1*1000W 100V line bridged, 1*600W 70V line bridged	4*500w at 4ohm; or 2*1000W at 8ohm bridged, 2*1000W 100V line bridged, 2*600W 70V line bridged
Output	100V or 4 - 16ohm, DSP software selectable
Frequency Response	20 - 20,000 Hz, +/- 0.5dB at 1W, 8ohm
THD	Less than 0.1% at 1W to full load
S/N Ratio	6dBu and 0dBu at 94dB
Input EQ	5 Bands
Output EQ	9 Bands
Cooling	Internal 12VDC fan, extensive heat sinking
Display	240*240 res, IPS colored
Dante interface	2 Channel
Power Requirements	100-240V AC, 50/60 Hz
Dimensions	44.5(H) x 483(W) x 330(D) mm
Built-in Dimensions	1 U rack 19 inch
Finish	Panel: Aluminum plate, black; Case: steel plate, black