Optional for Dante network audio
With network TCP/IP control, and it can realize the management of multiple devices
Power on or off remotely
Use 4.3 inch IPS capacitive touch screen
With built-in DSP digital processor
Support multiple connection method: USB, TCP/IP, RS232, RS485
Monitor the working status of the power amplifier remotely in real time
The power amplifier can be identified by software on site
Switch to bridging or matrix mode freely
Three levels of input sensitivity can be adjusted 0dBu/6dBu/12dBu, software or color LCD screen setting
With standard Fir function, support 4×2048 Taps
Support constant voltage and constant resistance: 100V, 70V, 8 ohms, 4 ohms
Software control, it can control media matrix and professional processor at the same time
Wide voltage operation 180-264VAC
| Channels |
4 |
| Rated power |
4*1500W@8Ω,4*2000W@4Ω, 100V (4*1250W); 70V(4*600W); |
| Bridge power |
2*3200W@8Ω |
| Minimum output impedance |
4Ω for each channel |
| Input |
Balanced input, 4*XLR |
| Output |
4*Spoken; 4*Terminal |
| Maximum input level |
20dBu/7.75V |
| Sensitive |
12dBu:31dB/6dBu:37dB/0dBu:43dB |
| Signal to noise ratio |
103dB@12dBu/ 1kHz |
| Frequency |
20Hz ~20kHz (±0.5dB) @1W,8Ω |
| THD+N |
<0.08%@1W |
| Sampling rate |
48k/24bit |
| Dante(Optional) |
4 Dante channels |
| Display |
4.3 inch IPS capacitive touch screen |
| Protection |
Audio limiter, high temperature, DC, high frequency,short circuit, back-EMF, peak current limiter, inrush current limiter, start-up delay, power circuit breaker protection, power supply overvoltage/undervoltage protection |
| PC software |
Software can control media matrix, audio processor, DSP power amplifier, active DSP module |
| Power supply |
180-264VAC |
Audited Supplier 
){kind=link}
){kind=link}