Professional audio Dante DP PoE Speaker High performance 90W Dante system Subwoofer speaker with DSP POE power supply
Model Number: DP 90 DSP
Description:
DP 90 DSP Speaker can realize its multifunction the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. DP 90 DSP adopts SSA inverter technology allowing that the high-quality enlargement of superior sound quality realizes on this compact speaker of low power design.
Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. DP 90 DSP integrates versatile functions like gain control, mute control, 5-band equalizer control and DSP with limit control. All these functions can perform remotely on the PC by DSP Controller Software.
< Built-in Dante module
< Built-in power amplififier module and its system efficiency > 70%
< DSP controlling software
< PoE power supply
< Over-current protection, Thermal protection and Overload protection
MODEL |
DP 90 DSP |
Type |
Subwoofer speaker with DSP and Dante |
Input Interface |
RJ-45 |
Audio Input Signal |
Dante™ | Balanced amplifified signal |
Cable |
Cat-5 or above |
Output Power |
90W, POE boost up to 60W depends on router power |
Bandwidth |
100M/1000M bps |
Frequency Range |
70Hz—18KHz(±3dB) |
Driver |
Lavoce Italy driver 6.5 inch coaxial |
Sensitivity |
91dB (1w/1m) |
Max. SPL |
117dB(continuous) |
Total Harmonic Distortion |
<0.30% |
Signal to Noise Ratio |
>100dB |
Noise Floor |
<200uV |
System Effificiency |
>70% |
Protective Circuitry |
Over-current protection, Thermal protection, Overload protection. |
Cooler |
Natural convection cooling |
Dimension |
(Height)305 x (Width)245 x (Depth)235mm |
Package |
(Height)369 x (Width)581 x (Depth)296mm |
Net Weight |
6kg |