1000W 2 Channel 500W Class D Ma Series Mixer Amplifier with Audio Sources Compact Mixer Power Amplifier with Dante and DSP

• Customization: Available
• Type: Professional Amplifier
• Usage: Hi-Fi, AV, KTV System
• Model NO.: 513102
• Used For: Professional
• Function: Amplifier Combined
• Output Number: 8
• Voltage: 110V-220V
• Output: 100V or 4 - 16ohm, DSP Software Selectable
• Frequency Response: 20 - 20,000 Hz, +/- 0.5dB at 1W, 8ohm
• Thd: Less Than 0.1% at 1W to Full Load
• S/N Ratio: 6dbu and 0dbu at 94dB
• Cooling: Internal 12VDC Fan, Extensive Heat Sinking
• Dante Interface: 2 Channel
• Power Requirements: 100-240V AC, 50/60 Hz
• Built-in Dimensions: 1 U Rack 19 Inch
• Finish: Panel: Aluminum Plate, Black; Case: Steel Plate, B
• Transport Package: Carton
• Specification: 5Kg
• Trademark: Ben & Fellows
• Origin: China
• HS Code: 8471800000
• Production Capacity: >50000
• Package Size: 999.00cm * 999.00cm * 999.00cm
• Package Gross Weight: 999.000kg

Product Description

1000W 2 Channel 500w class D MA Series Mixer Amplifier with Audio sources compact mixer power amplifier with Dante and DSP

 Description:

This model is a multi-function network DSP digital High-Z and low-Z power amplifier 2*500W@4Ω, 2*300W@8Ω, bridged 1000W@8Ω, low-Z100V-1000W@10Ω. It can remotely monitor the status of power amplifier, set compression Controller, limiter, noise gate, parametric equalization, matrix routing, delay and other DSP functions in real time. Simple software interface provides customers with simple setup and operation experience, and a variety of connection methods ensure its good configurability and expandability, suitable for various applications, such as performance center, theatre, gallery, hotel, conference center, shopping center, retail store, restaurant, etc.

 Features:
> Flexible Dante Network amplifier with DSP with both 100V line and 8ohm > Software selectable
> Local analog audio input selection
> Built-in DSP digital processor
> Network TCP/IP control for multiple device management > Support multiple on line modes: USB, TCP/IP, RS232, RS485 > Real-time remote monitoring of power amplifier working status.

Specification

Output Power	2*500w at 4ohm; or 1*600W at 8ohm bridged, 1*600W 100V line bridged, 1*600W 70V line bridged
Output	100V or 4 - 16ohm, DSP software selectable
Frequency Response	20 - 20,000 Hz, +/- 0.5dB at 1W, 8ohm
THD	Less than 0.1% at 1W to full load
S/N Ratio	6dBu and 0dBu at 94dB
Input EQ	5 Bands
Output EQ	9 Bands
Cooling	Internal 12VDC fan, extensive heat sinking
Display	240*240 res, IPS colored
Dante interface	2 Channel
Power Requirements	180-264V AC, 50/60 Hz
Dimensions	44.5(H) x 483(W) x 330(D) mm
Built-in Dimensions	1 U rack 19 inch
Finish	Panel: Aluminum plate, black; Case: steel plate, black